Opening Plastic Blister Pack for Handling and Storage

Opening a plastic blister pack can be a challenge, but with the right technique, you can do it safely and efficiently.

Using scissors is a common method, but be careful not to cut yourself on the sharp edges.

The blister pack is designed to be opened by prying it open from the sides, not by cutting it, as this can cause the contents to break.

To avoid damaging the contents, you should also avoid using excessive force or pressure when opening the pack.

For small items, a plastic blister pack opener can be a useful tool, as it allows you to pry the pack open without causing damage.

To open a plastic blister pack, you need to break the tamper seal and carefully remove the blister top. This can be done by breaking the seal with a fingernail or sharp object, then pulling the top half of the pack straight up and away.

The key is to avoid letting the edges of the top half come into contact with the wire on the spool, as this can cause breakage or kinks in the wire. If you do notice wire damage during receiving-inspection, it's best to notify the manufacturer immediately.

Some people find it helpful to use a device like the Zip-it Opener, which can make opening these packages much easier and safer. This device uses a roller blade to slice off the sealed edge of the package, making it simple to use and requiring little strength or dexterity.

Removing the spool from the blister pack can be a delicate process, but with the right technique, you'll be able to do it safely and effectively.

To start, you'll want to secure the bottom of the blister pack, which will help prevent the spool from slipping out. Gently grasp the outside flange of the spool, making sure to avoid touching the wire.

Touching the wire can cause breakage, kinks in the wire, and/or fingerprints, so it's essential to be careful. Very slowly twist the spool while slightly pulling it away from the blister pack, just like removing the lid from a jar.

This gentle twisting motion will help the spool come loose from the blister pack. By following these steps, you should be able to remove the spool without causing any damage.

Opening blister packs and clamshell plastic packaging can be a real challenge. It's frustrating when you need to cut or pry open the packaging just to get to the product inside.

To make it easier, designers can use a thinner and more flexible plastic, which will make the package easier to pry apart without compromising its strength. This will help prevent cuts and scrapes.

Some blister packs have a tamper-evident strip that's easier to break, which still deters theft but is less frustrating for consumers to open. Others have a tab or easy-to-use opening mechanism that makes it easier to open the package without damaging it.

Readers also liked: Wine Box Packaging

If you're trying to open a blister pack, start by breaking the tamper seal with a fingernail or sharp object. Then, remove the blister top by holding the bottom flap and carefully pulling the top half of the pack straight up and away.

Take care not to let the edges of the top half come into contact with the wire on the spool, as this can cause breakage or kinks. If you notice wire damage during inspection, notify the manufacturer so arrangements can be made for a replacement.

To remove the spool from the blister pack, grasp the outside flange of the spool while avoiding touching the wire. Twist the spool slowly while pulling it away from the blister pack, just like removing the lid from a jar.

Some people find it helpful to cut along the outside of the packaging, rather than trying to cut through the plastic itself. This can be done with a sharp object, and it's often the safest and most effective way to open the package.

If you're struggling to open a blister pack, consider using a device like the Zip-it Opener, which can slice off the sealed edge of the package with ease. This can be especially helpful for people with arthritis or other dexterity issues.