How to Open Blister Pack Without Damaging Contents

Opening a blister pack without damaging the contents can be a challenge, but it's definitely doable. You can start by identifying the type of blister pack you're dealing with, as some are designed to be more easily opened than others.

For example, a blister pack with a plastic backing can be scored with a utility knife or a pair of scissors to create a small tear, allowing you to gently pry it open.

Opening a blister pack can be a frustrating experience, but there are ways to do it safely and effectively. To open the blister pack, start by breaking the tamper seal with a fingernail or other sharp object.

To remove the blister top, hold the bottom flap and carefully pull the top half of the pack straight up and away, taking care not to let the edges of the top half come in contact with the wire on the spool, as this can cause breakage or kinks in the wire.

If you notice wire damage during receiving-inspection, notify the manufacturer immediately so arrangements can be made to evaluate the wire for damage and a possible replacement.

Removing the spool from the blister pack requires some care to avoid damaging the wire. This is because touching the wire can cause breakage, kinks in the wire, and/or fingerprints.

To secure the bottom of the blister pack, gently but firmly grasp the outside flange of the spool, being careful not to touch the wire.

When twisting the spool, do so very slowly while slightly pulling it away from the blister pack, much like removing the lid from a jar. This will help you avoid touching the wire.

The goal is to remove the spool without causing any damage to the wire. By following these steps, you should be able to successfully remove the spool from the blister pack.

Opening blister packs can be a challenge, but with the right technique, you can do it safely and easily. Breaking the tamper seal with a fingernail or other sharp object is the first step.

To remove the blister top, hold the bottom flap and carefully pull the top half of the pack straight up and away. Take care not to let the edges of the top half come in contact with the wire on the spool, as this will cause breakage or kinks in the wire.

If you notice wire damage during receiving-inspection, it's essential to notify the manufacturer immediately so arrangements can be made to evaluate the wire for damage and a possible replacement.

To remove the spool from the blister pack, gently but firmly grasp the outside flange of the spool, being careful not to touch the wire. Twist the spool while slightly pulling it away from the blister pack, continuing to avoid touching the wire.

Here are some general tips for opening blister packs safely:

Some people find it helpful to use a device like the Zip-it Opener, which can make opening blister packs easier and safer. This device operates on the principle of a can opener and is battery-powered, making it simple to use and requiring little strength or dexterity.